Comet Products

Features :

• ln 'Comet' Rasvanti Sugarcane Juice is fully extracted by passing two Sugarcanes only one time. ln Case of Rasvanti available in market you have to pass Sugarcane 5 to 6 times to extract totaljuice. Higher efficiency of extracting juice reduces fuel consumption, labour & time, resulting into very high profitability.
• Comet Rasvanti saves fuel because it runs on well-known 'Comet' Engine (3 hours run in 1 Ltr. Diesel)
• As per your convenience entire set can be mounted on 4 wheel trolley. Provision for storage of Sugarcane is also provided in the trolley.
• lnstalled 'Comet' engine can be used for other application also.
• Provision is made to operate'Comet' Rasvanti with electric motor also
• Due to fittment of direct lov joy coupling with the best Gear-box, the weight of rasvanti has been reduced considerably. Due to better design and construction results into very less time for maintenance.

Details :

• Type : Vertical, totally enclosed, air cooled, single cylinder, four stroke cycle, compression ignition, cold starting diesel engine.
• Combustion : Direct fuel injection in open type combustion chamber provided in an aluminum piston crown in combination with long stem, Multihole nozzle, results in low fuel consumption and easy starting.
• Crankshaft: lt is designed with integrated balance weight to avoid bolting and is fitted with taper roller bearings for long life.
• Cylinder head : Finned High grade cast iron carrying smooth air & exhaust ports passage.
• Cylinder Liner/Block : Deep finned, high grade iron casting having wear resistant properties
• Fuel system : High speed diesel oil is supplied to the fuel pump by gravity feed through wiremesh filter in fuel tank and efficient paper type element filter before pump. There is one more filter (inbuilt) in iniector inlet.
• Lubrications : Force feed lubrications by plunger type pump incorporating full flow filter, to large end bearing. Matn bearings, being taper roller type need no separate supply. Other moving parts are splash lubricated.
• Cooling : By flywheel mounted radial fan cooling through a stream lined cowling.
• Starting : Engine is designed for starting by hand cranking with the help of starting handle.
• Rotation : Standard rotation is clockwise when looking at the flywheel . . Drive : Standard power take off is from flywheel side at full speed. lt can be provided from gear end from extension shaft at half speed & from crankshaft full speed (Birotational Engine)
• Exhaust-System : A silencer of standard type (Peeper pot) is fitted for adequate silencing.
• Air Cleaner : Oil bath type, large capacity, for efficient filteration.
• Lub oil: SAE-3040 OR equivalent grade.
• Standard accessories : Air cleaner, exhaust silencer, starting handle, set of spanners and screw driver etc.
• Optional : To avoid over loading, provision for head adjustment by variable speed drive.

Details :

• Type : Vertical, totally enclosed, water cooled, single cylinder, four stroke cycle, compression ignition, cold starting diesel engine.
• Engine Combustion : Direct fuel injection in open type combustion chamber provided in an aluminium piston crown in combination with long stem multihole nozzle; result in low fuel consumption and easy starting.
• Grankshaft : Designed with integrated balance weight and is fitted with taper roller bearings for long life & with provision of taper degree for flywheel fitment.
• Cylinder head : High grade cast iron with smooth air & exhaust ports, clear water jackets for perfect cooling.
• Cylinder Liner : Special grade high wear resistant cast iron.
• Fuel System : High speed diesel oil is supplied to the fuel pump by gravity feed through wiremesh filter in tank and efficient paper type element filter before pump. There is one more filter (inbuilt) in injector inlet.
• Lubrications : Force feed lubrications by plunger type pump incorporating full flow filter, to large end bearing. Main bearings, being taper roller type need no separate supply. Olher moving parls are splash lubricated.
• Cooling : Engine cooling can be arranged by run through water system or cooling tank.
• Starting : Engine is designed for starting by hand cranking with the help of starting handle.
• Rotation : Standard rotation is clockwise when looking at the flywheel end.
• Drive : Standard power take off if from flywheel side at full speed. lt can be provided from gear end at half speed.
• ExhaustSystem : A silencer of standard type (Peeper pot) is fitted for adequate silencing.
• Air Cleaner : Oil bath type, large capacity for efficient filtration.
• Lub oil : SAE - 30-40 or equivalent grade.
• Standard accessories : Air cleaner, exhaust silencer, staffng handle, set of spanners and screw driver.
• Optional : To avoid over loading, provision for head adjustment by variable speed drive.